To Visi t Furman* Click Below
This is only a Partial Listing of Power Conditioning & Equalization Products Available
If you don't see what you are looking for please Call:
781-449-1005
Or
E-mail:
*The link above will take you from the "You-do-it" Electronics Website. You may encounter Sites which use cookies. Please use these links @ your own risk. Although every effort has been made to check the content of the sites above,"You-do-it" Electronics cannot be responsible for content contained in the websites which are linked above.
|
"You-do-it" Electronics Center ® | home
Furman Index | Furman AC-215, AR-1220 | AR-15II, AR-PRO | M-8X, M-8D, MP-15 | PL-8II, PL-PLUSDII, PL-PLUSII | PL-PRODII, PL-PRODM,PL-PROII | ACX-1, ADP-1520, PLUGLOCK, PS-8R, RS-1, SS-4 FURM, SS-6B, GN-LED | SB-1000
|
|
Furman ADP-1520
AC Adapter Cord, 20A Socket to 15A Plug
Furman ADP-1520
YDI Price $14.90
|
|
|
Furman PLUGLOCK
Features
 Has outlets spaced widely enough for five bulky transformer “wall warts”
 Has clamps to securely lock wall warts into place
 Can lock regular plugs as well as wall warts
 Mounts safely out of sight, in the back of your rack
 Heavy duty 5 foot, 14 AWG three – conductor cord
 Rated 15 amps
 Circuit-breaker protected
 All steel construction
 Three Year Warranty
 Dimensions: 12.6” x 2.3” x 2.5”
 Mounting hole spacing: 11.6” (295 mm)
 Clamps adjust from 0.4” to 2.1” above outlet
 Weight: 2 lbs 10 oz (1.2 kg)
FurmanPLUGLOCK
YDI Price $34.90
|
Furman PS-8R
YDI Price $179.00
|
Furman PS-8R Power Conditioner Sequencer
Description
The Furman PS-8R Power Sequencer is needed whenever various kinds of equipment must be powered up or down in groups, rather than all simultaneously. In audio systems, sequenced powering is often necessary to allow turn-on transients from low level amplifiers and processors to settle down before any power amps are turned on, because simultaneous powering would result in a loud, annoying, and potentially destructive “pop” reaching the speakers. And in any large system whose components present an inductive load to the AC line (including electric motors, power supplies, and power amplifiers of all kinds), sequenced powering can avoid excessive inrush currents that cause circuit breakers to trip even though the steady-state currents are not excessive. Using the PS-8R is a simple and inexpensive way to apply and remove power in a controlled, repeatable, foolproof 3-step sequence. It is ideal when large installations must be switched by inexperienced personnel. The PS-8R provides three outlet pairs labeled Delay 1, Delay 2, and Delay 3, that receive power almost immediately, 5 and 10 seconds respectively after the front panel switch is thrown to “ ON.” When thrown to “OFF,” the sequence is reversed, with Delay 3 losing power almost immediately, Delay 2 after 5
seconds, and Delay 1 after 10 seconds. The delay intervals are preset at these durations, but may be altered by means of an internal trimpot adjustment. In addition to the delayed outlets, a single front panel outlet and a rear panel pair are unswitched. All rear panel outlets are standard 120V, 15A duplex types; isolatedground “ super spec” outlets may be substituted at additional cost.
The PS-8R offers all basic power conditioning features besides its sequencing capability. It provides varistor spike and surge protection across all three modes, as well as a sophisticated EMI/RFI filter for blocking radio frequency line noise. Clean, filtered power is provided at all 9 outlets, even the unswitched ones. The PS-8R also assists in analyzing any faults that may occur in the AC mains wiring. Two green and one red neon indicators light in a specific pattern for normal wiring and in different patterns for various faults. When the AC wiring is correct, both green indicators will be lit. If a fault is present, a chart next to the indicators will identify its exact nature. PS-8R Architects and Engineers Specifications The Power Sequencer shall provide three delayed outlet pairs with a delay time interval of 5 seconds, controlled by a front panel master switch. The on-off sequence shall be initiated either locally or with a momentary or maintained contact switch at a remote location, connected with Class 1 wiring. Outlet switching shall be by means of relays with silver cadmium oxide contacts rated at least 30 amps for inductive or resistive loads. Relay life expectancy shall be at least 100,000 operations at rated load. Printed circuit boards shall be 3 oz. copper FR4 glass epoxy. Indicator lights shall be provided to signal when power is availableat each of the delayed outlets. All outlets shall be rated 15 amps. Unswitched outlets shall be provided both in front and rear. Spikes at all outlets shall be clamped to no more than 250 V peak (line to neutral, line to ground, or neutral to ground.) Response time shall not exceed 1 nanosecond. The unit shall absorb a surge current of up to 5000 amperes for 10 ms without damage. RF noise attenuation shall exceed 40 dB (transverse mode) and 60 dB (common mode) from 1 to 200 MHz. A 15 amp circuit breaker shall be provided, and the AC cord shall be 14 ga. and
ten feet long.
The Power Sequencer shall mount in a standard 19" rack, and
occupy no more than one unit (1.75") of rack space. It shall be designated the Furman PS-8R.
Three Year Warranty The Furman PS-8R are protected by a three year
limited warranty covering defects in materials and workmanship.
|
|
|
SS-6B
6 outlet strip or block
Heavy duty metal construction
15 ft power cord
Lit ON/OFF switch
Circuit Breaker
EMI/RFI Noise attenuation
Furman SS-6B
YDI Price $24.90
|
|
|
Furman GN-LED
The Furman Gooseneck Lights are the perfect accessory for any Series II Power Conditioner. All of the Series II units are designed with a rear BNC connector to accommodate either a GN-I or GN-LED for rear rack illumination. These flexible 12 inch lights provide an ample amount of light and can be controlled by an on/off switch located on the front of the unit. In addition to their use with Furman Series II Power Conditioners, the versatile GN-I and GN-LED will work with a variety of other products in various applications. The replaceable head / bulb (depending on the model) provides for virtually indefinite use. Get a Furman Rack Light and see what you’ve been missing!
Furman GN-LED
YDI Price $39.90
|
Many other Brands & Types of Power Conditioners & Rack Mount Products Are Available!
Bring your Friends & Family to Visit America's Unique Electronic Store.
Prices current 9/29/2008. Prices are subject to change without notice. The products listed on our website are typically stocked by "You-do-it" Electronics Center. We try to maintain a current listing ofproducts stocked . Occasionally products which are discontinued may be listed on our website.
Please E-mail Sales@youdoitelectronics.com or Call for current availability. Prices are subject to change without notice. All orders are subject to acceptance by this company & our Vendor in accordance with its standard acknowledgement form. All prices are subject to all applicable State and/or Local sales taxes. Terms are MasterCard, Visa, Discover, or American Express or Check with order, unless other arrangements are made with our credit department.
|
|