|
|
LIGHT METER Model#615
This instrument is a portable easy to use 3 1/2 digit, compact sized digital light meter designed for simple one hand operation. It provides measurement in lux and fc units. The meter has a backlit LCD display, PEAK HOLD (50mS pulse light) and DATA-HOLD feature.
 Peak hold
 Display hold
|
|
|
Carbon Monoxide (CO) Meter Model#627
 CE Mark Approval.
 Portable and simple one hand operation.
 Display Back Light.
 With MAX/DATA HOLD function.
 Hand Held lightweight design.
 Wide CO measuring range of 0 to 1000PPM
|
|
|
Dual K-type Thermometer Model#630
The 630 is a portable 3 1/2 digit, compact-sized dual input digital thermometer designed to use external K type thermocouples as temperature sensors. This unit can display the temperature difference between it two inputs.
 Backlight Display
 Hold
 Max. Hold
|
|
|
INFRA-RED THERMOMETER WITH LASER POINTER Model#635
The 635 is a portable easy to use 3 digit, compact sized infrared digital thermometer with laser pointer, designed for simple one hand operation. Meter comes with Backlit LCD display. Auto hold function and auto power down (20 seconds approx.) after releasing MEAS button to extend battery life.
 Laser pointer
 Reading hold
 Adjustable emissivity
|
|
|
Temperature Meter, Dual Input Model#710 BK
Model 710 offer a dual display where T1 and T2 can be switched between the large and small digits. While T1 and T2 is displayed on the large digits, T1 and T2 alternate on the small digits. With the optional ThermoLink software and RS232 cable (AK 710), even Model 710 becomes a real time data logging meter when attached to a PC.
 Auto power off
 Data hold Max/Min
 RS232 output port
|
|
|
Datalogging Temperature Meter, Dual Input Model#715 BK
Model 715 offer a dual display where T1 and T2 can be switched between the large and small digits. While T1 and T2 is displayed on the large digits, T1 and T2 alternate on the small digits. With the included ThermoLink software and RS232 cable the 715 becomes a real time data logging meter when attached to a PC.
Triple display
Data logging RS232 port w/ cable and software
Time reading
AC adapter port
|
|
|
Digital Sound Level Meter Model#732 BK
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, B+K Precision's Sound Level Meter can get the job done. The model 732 Sound Level Meter provides 30~130 dB capability in three convenient measurement ranges Low, Med and Hi with an accuracy of ±1.5 dB. The meter meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting. Two auxiliary ports provide either AC output, 1Vrms full scale, or DC output, 10mV /dB. The model 732 can meet your sound testing needs.
 4 digit LCD, Resolution
 0.1 dB update cycle 0.5 s
 Standard IEC651 Type II
 Condenser microphone w/ windscreen
 MAX MIN function
 Low battery indication
|
|
|
Auto Ranging Capacitance Meter Model#830A
The Model 830A Capacitance Meter is a highly accurate capacitance meter. It is fully auto ranging and can be powered from a alkaline battery or from AC/DC adapter (sold separately). A selectable range hold feature provides for fast batch testing of large value capacitors.
 Auto ranging
 Selectable range hold feature
 One touch Zero adjustment Button
|
|
|
Capacitance Sorting Meter, Autoranging Model#890
The Model 890 Capacitance Meter features a large LCD with dual display, 5,000 counts resolution, and 10 automatically selected ranges with full scale value from 0.1pF to 50mF. Designed to meet the latest international safety standards, the meter's dedicated chip and microprocessor allow programmable high/low limits or preprogrammed standard capacitor tolerances, making it ideal for measuring values, inspection, sorting capacitors and testing capacitors against standard tolerances. Optional software and cabling is available for PC based data logging and monitoring. The 890 is a unique value and is indispensable on the inspection bench.
 Dual display simultaneously displays value and deviation from selected tolerance
 Sort on preset tolerance of 1, 5, 10%
 Program unique values to sort for specific circuit applications
 RS232 interface for data logging software available
|
|
|
Audio Generator Model#3001
 20 Hz to 150 kHz
 Sine/Square Wave Audio Generator
 Sine and square wave generator 20 Hz to 150 kHz in 46 steps
 Low distortion RC oscillator
 Variable output control
 Compact, fully portable, light weight
 Low battery indicator
|
|
|
Hand Held Battery Operated 10MHz Sine & Square Wave Generator Model#3003
 0.1 Hz to 9.9999999 MHz Sine/Square Wave Signal Generator
 Simultaneous Sine and Square wave generation
 0.1 Hz Frequency Selectability
 0.02% Signal Accuracy
 Sine Wave Output – 0 to 4.5Vp-p (no load)
 Square Wave Output – 5Vp-p (no load) 50 Ohm output impedance
 AC power adapter included
 Can be powered by a standard 9V battery
|
|
|
Mini AC/DC Clamp Meter Model#313A
 Display hold
 4 Digit LCD display
 0.98” Clamp opening
 Overload protection
 600A AC/DC range
 Measures current between 5% to 100% full scale
 Measures AC/DC Volts to 600V
 Measures resistance to 10K ohms
 One year warranty
|
|
|
1000 V DIGITAL MEGOHMETER Model#308 BK
Insulation Tester
This insulation tester is intended primarily for periodic testing of industrial motors, transformers, electrical wiring, and cable insulation for signs of deterioration. Low readings may indicate impending failure allowing for permit replacement of suspect component during routine maintenance rather than risking component failure. It is also useful for safety testing of TV sets and appliances to assure no hazardous leakage current. The voltage and resistance ratings for insulation testing are often specified for the product to be tested.
 LCD display
 Selectable 250V, 500V, or 1000V insulation test
 Low resistance test
 Extra rugged integral carrying case
 Live circuit indicator warns of safety hazard
|
|
|
3200 Count Clamp Meter Model#350B
The 350B allows for non invasive current measurements. It measures AC current up to 1000A, AC voltage to 750V, DC voltage to 1000V and resistance to 30M ohms.
 Measure AC current up to 1000A
 Jaw openings 2.24"
 3 3/4 digit, 2000 count display
 Continuity and diode test
 Frequency measurements to 32KHz
 Low battery indication
|
|
|
DC/AC Multifunction True RMS Current Clamp Meter, 2000A Model#367A
Measure up to 2000A with this reliable, rugged instrument. Many of B+K Precision clamps are much more than a current clamp offering the ability to measure, voltage resistance, capacitance and even frequency. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity.
 True RMS Measures up to 2000A
 AC/DC Measures up to 1000V AC/DC
 Jaw openings 2.24"
 Low battery indication
|
|
|
LCR Meter Model#875B
The rugged 875B LCR is a reliable easy to use workhorse that will measure inductors, resistors and capacitors quickly and accurately. Utilizing special circuitry, the measurement more closely replicates true in circuit measurements. Ten range resistance range measures to 0.001 zero adjust removes leads resistance.
 Precision measurement of very low resistances
 Measures D (dissipation factor)
 Unique drop-proof construction
 Tilt stand
|
|
|
Dual Display Auto Ranging LCR Meter Model#878A
The 878A measures capacitance, resistance (of non-inductive components) and inductance. Components can be measured with selectable test frequencies in series or parallel modes as desired. The 4 1/2 digit main LCD displays values to 19,999, and the secondary 3 digit 1,000 count display reads D or Q. Both models can be used in either auto ranging or manual ranging modes. Features
 Selectable test frequencies 120Hz, 1KHz
 Simultaneously displays measured component value and Q or Dissipation Factor (D)
 Display hold
 Relative mode
 Tolerance mode
 RS 232 Interface (cable and software required)
|
Many other Models & Types of Test Equipment & Related Products are Available!
Bring your Friends & Family to Visit America's Unique Electronic Store.
The products shown above are typically stocked by "You-do-it" Electronics Center. We try to maintain a current listing of current products. Occasionally products which are out of production may be listed on our website.
Please E-mail Sales@youdoitelectronics.com or Call for current availability.
All orders are subject to acceptance by this company & our Vendor in accordance with its standard acknowledgement form. All prices are subject to all applicable State and/or Local sales taxes. Terms are MasterCard, Visa, Discover, or American Express or Check with order, unless other arrangements are made with our credit department.
To return to the previous page please use your Browser's back button.
|